5. Start DISM
5.1. Standard method
- Right-click on Start and open the command line (Admin).
- Type the following command and press Enter:
- DISM / Online / Cleaning up the image / Restoring health
- Wait until the analysis is complete.
- Restart your computer and try the update again.
And the third diagnostic device we’re going to use is DISM. Deployment Image Servicing and Management (DISM) is a powerful tool to reload a system image. This way it can also fix any BSOD errors.
In the following, we will guide you through both the standard procedure and the procedure with installation support:
5.2. With Windows installation support
- Insert the Windows installation media.
- Right-click in the Start menu and select Command Prompt (Admin).
- On the command line, type the following commands and press Enter after each command:
- Erase/clean/scan image
- Now type the following command and press Enter:
- DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess
- Be sure to replace the valueXwith the letter of the attached drive during Windows 10 installation.
- Restart the computer when the process is complete.
If you’re tired of getting error messages when you try to run DISM, use this guide to fix them.
6. Removing problematic applications from your PC
Third party applications are often the cause of blue screen of death errors. Users have reported that Comodo Optimizer causes the error CRITICAL_OBJECT_TERMINATION.
According to users, the problem was solved after removing Comodo Optimizer. So make sure you uninstall this software if you have installed it.
Another common cause of this error may be your antivirus program or firewall. We therefore recommend that you temporarily uninstall installed third-party antivirus software.
Run a system check for errors
Press Start Scan to find problems with Windows.
Press Repair Everything to fix problems with proprietary technologies.
Run a PC scan with Restoro Repair Tool to find errors that cause security problems and slowdowns. Once the scan is complete, the repair process replaces the damaged files with new files and Windows components.
Windows 10 comes with Windows Defender that acts as the default antivirus. So your PC is not completely defenseless, even if you remove your third-party antivirus software.
Note that uninstalling the antivirus software may not solve the problem. Therefore, use a special removal tool and delete all the files associated with your antivirus.
If uninstalling the antivirus program solved the problem, you can now reinstall the antivirus program or switch to another antivirus program.
You can also open the BSoD log file to find out what caused your PC to crash and which program caused the annoying error.
7. SSD firmware update
Many users have reported that the CRITICAL_OBJECT_TERMINATION error is caused by outdated SSD firmware. It is recommended to upgrade the SSD firmware to fix this error.
Upgrading the firmware is an advanced procedure that can damage the SSD if not done correctly. Therefore, be very careful when you decide to update the firmware of the SSD.
Discover the best SSD hard drive management software for Windows to keep your hard drive working optimally.
8. Disable TRIM on your SSD
- Press Windows + X on the keyboard to open the main menu and select Command Prompt (Admin) from the list.
- When the command line opens, paste the following line and press Enter to see if TRIM is enabled or disabled. If the result is 0, it means that TRIM is enabled and should be disabled. fsutil behavior request DisableDeleteNotify
- If TRIM is enabled, insert the following line and press Enter: fsutil behavior set DisableDeleteNotify 1
- Close the command line.
According to users, disabling TRIM can sometimes help resolve CRITICAL_OBJECT_TERMINATION errors. Note that this is just a workaround, but it may be useful to you.
9. Disable hot-plugging for SATA devices
Some users have reported that disabling the hotplug for SATA devices in the BIOS solved the problem.
For instructions on how to open the BIOS and disable the hot plug for SATA devices, we strongly recommend that you consult your motherboard’s manual for detailed instructions.
We also recommend that you be aware of the factors that usually underlie this problem. Read this guide to find out what causes a BSoD error.
10. Check the SATA plug-in card.
Many SSDs come with plug-in cards that you install in your PC and use to connect the SSD.
Sometimes these cards stop working and you need to replace the defective SATA card with a new one. You can also simply connect the SSD directly to the SATA port on your motherboard.
11. Set the drive mode in BIOS to ATA.
Sometimes the CRITICAL_OBJECT_TERMINATION error can be caused by certain BIOS settings, usually the drive mode.
To fix this error, users say you need to change the disk mode in the BIOS to ATA. We strongly recommend that you read your motherboard’s user manual for detailed instructions.
Alternatively, you can try a high-quality specialized software that can get you out of this predicament. So check out this article on the best BSoD repair tools.
12. SA.D.A. cable replacement
Some users reported that this error was caused by the SATA cables, and according to them, replacing the SATA cables solved the blue screen of death error. We therefore strongly recommend checking and replacing the SATA cables.
The CRITICAL_OBJECT_TERMINATION BSoD error is often caused by a hard drive or SSD. If you are experiencing this problem, we highly recommend that you try some of our solutions.
Is there another problem?
Repair them with this tool:
- Download this PC recovery tool excellent review from TrustPilot.com (can be downloaded from this page).
- Click on the Start Scan button to scan for Windows issues that may be causing the PC problems.
- Click Restore All to fix patented technology problems (exclusive discount for our readers).
Restoro was downloaded by 0 readers this month.
bugcheck code 10,bugcheck analysis,bugcheck 3b,bugcheck code 239,bugcheck code 292,bugcheck code 26,Privacy settings,How Search works,0xa0000006,bugcheck 0